Minion DHR II vs eRuban Plus review

Features

• Single, dual compound, 3C MaxxTerra, 3C MaxxGrip, or Super Tacky options

• Select specs are Tubeless Ready (TR), confirm in table below

• Wide Trail (WT) sizes optimized for 35mm inner width rims

• EXO, EXO+, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options

Features

• PureGrip Compound

  The advanced new compound

  Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name “PureGrip”, is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia).

• PolyX Breaker

  Puncture-defence

  With our PolyX Breaker®, we bring our car expertise to the bicycle tire segment: Polyester has been used successfully for years in car tires and been tried and tested many times. The extremely resistant polyester fibre is woven tightly crosswise. In this way, a very high fabric density is reached which not only makes the Breaker more resistant to foreign objects but is also especially resistant to punctures. The rolling resistance is also not negatively affected by the PolyX Breaker®.

• E50

  Suitable for E-Bikes

  For our E-Bike tire we fall back on over 100 years’ experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.

• Plus Breaker

  Maximum safety

  Between the tread and the carcass, a puncture protection of highly elastic special rubber is used. This practically impenetrable puncture protection successfully defies all types of foreign objects from getting to the inner tube below. Even a drawing pin cannot get through. Tires with Plus Breaker can be seen in almost every segment nowadays: Whether racing cycles, MTB or city/trekking, the Plus Breaker guarantees maximum safety without negatively affecting the cycle properties of the tire. The consistency of the breaker has been adjusted so that the tire does not feel spongy when cornering. The Plus Breaker is true puncture protection. Please read the air pressure instructions!

Usage

Usage

-

Technologies

• Downhill (DH) Two layers of casing material are used from bead to bead, providing additional protection and sidewall stiffness for downhill applications.

• 3C MaxxTerra An intermediate compound configuration used in select mountain tires. 3C MaxxTerra is softer and offers more traction than 3C MaxxSpeed, yet provides better treadwear and less rolling resistance than MaxxGrip.

• Super Tacky (ST) Super Tacky (ST) is a special low-rebound, high-traction compound used in select mountain tires.

• EXO+ Our EXO+ construction combines two of our best puncture protection materials: SilkShield and EXO. The SilkShield layer runs from bead-to-bead with a layer of EXO along the sidewalls. Combined, these two materials create EXO+ which improves tread puncture protection by 27%; sidewall durability by 51%; and resistance to pinch flats by 28%.

• Tubeless Ready Tubeless tires provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tire; and less chance of flatting because there is no tube. Liquid sealants should only be used in the following types of tires: tubeless road, tubular, and tubeless ready. The use of liquid sealants in any other Maxxis tire will void the warranty.

• Wide Trail Wide Trail (WT) construction optimizes the tire’s tread layout and profile on today’s modern, wider rims. Traditional tires are designed around older, narrower rims and can create an overly square tire profile, leading to less than optimal performance. WT tires are optimized for a 35mm inner rim width but are proven to work over a range from 30-35mm inner rim widths, depending on the rider’s preference. Maxxis Wide Trail XC tires are optimized for use with 30mm internal width rims, but they will perform well on rims as narrow as 25mm. Maxxis does not recommend rims wider than 30mm or narrower than 25mm

• Double Down (DD) DoubleDown (DD) is the next step in the evolution of the dual-ply tire casing for enduro racing. Two 120 TPI casing layers reinforced with a butyl insert provide the enduro racer with the support and protection of a downhill tire, but in a lighter package.

• EXO An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tires. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tire remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high.

• 3C MaxxGrip 3C MaxxGrip uses the softest rubber compounds to offer the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications.

Technologies

-

Specifications

24

26

27.5

29

Specifications

"29"

"27.5"